One of the most common and practically useful experiments in all of fluid dynamics involves holding an object in air or submerging it fully underwater, exposing it to a steady flow to measure its resistance in the form of drag. Studies on drag resistance have led to technological advances in airplane and vehicle design and even advanced our understanding of environmental processes.
One of the most common and practically useful experiments in all of fluid dynamics involves holding an object in air or submerging it fully underwater, exposing it to a steady flow to measure its resistance in the form of drag. Studies on drag resistance have led to technological advances in airplane and vehicle design and even advanced our understanding of environmental processes.
That’s much tougher these days. As one of the most thoroughly studied aspects in fluid dynamics, it’s become hard to glean or detail new information on the simple physics of drag resistance from these classic experiments. But a team of engineers led by Brown University scientists managed to do so by bringing this problem to the surface—the water surface, that is.
Described in an new paper in Physical Review Fluids, the researchers created a small river-like channel in the lab and lowered spheres—made of different water repellent materials—into the stream until they were almost fully submerged by the flowing water.
The results from the experiment illustrate the fundamental—and sometimes counterintuitive—mechanics of how drag on a partially submerged object may be several times greater than drag on a fully submerged object made of the same material.
For instance, the researchers—led by Brown engineers Robert Hunt and Daniel Harris—found that drag on the spheres increased the moment they touched the water, no matter how water repellent the sphere material was. Each time, the drag increased substantially more than what was expected and continued to increase as the spheres were lowered, beginning only to drop when the spheres were fully beneath the water.
„There’s this intermediate period where the spheres going into the water are creating the biggest disturbances so that the drag is much stronger than if it were way below the surface,“ said Harris, an assistant professor in Brown’s School of Engineering.
