Apple’s third-generation iPad Pro is likely to have important but incremental improvements over its predecessor and include technologies introduced in the iPhone X.
In July 2010, I wrote about the next-generation iPad and what Apple needs to deliver.
Based on information gleaned from updates in iOS and intelligence coming out of the semiconductor industry at the time, I polished the crystal ball — in my usual purely speculative way — of what I thought successive iPads might look like, or the features they should contain.
Read also: If Apple’s Mac has any future, it’s in the cloud
I iterated this over the years — for the third-, fourth-, fifth-, and sixth-generation of the iPad. Some stuff I got right, some stuff I got wrong.
Typically, I’ve done this shortly after an iPad’s release. This time, I’m going to do it only a few weeks before the October 30,2018 event, because, up until recently, I didn’t think we had enough clues.
When Apple announced its new, lower-cost, Apple Pencil-compatible iPad at its education event, it did not announce new iPad Pro models, which have not had a revision since June 2017 and, arguably, have not changed much since September 2016 .
Now that the iPhone XS, the XS Max have been released, and the iPhone XR is due shortly, I would like to concentrate on the iPad Pro models and speculate what features they might contain.
The Touch ID sensor, which has been part of the iPad Pro since its inception in 2015, is likely to make a departure with the introduction of the 10-inch and 12.9-inch models in favor of the Face ID sensor first introduced in the iPhone X and now the XS, the XS Max, and the XR.
The usability changes on the iPhone X were substantial enough to cause some controversy because it required significant user adaptation.
I would expect that those folks who did not migrate to the current generation of iPhones — who would be using Face ID for the first time on an iPad Pro — would endure similar issues, although iOS 12 has undergone enough tweaks in the intervening time period that a lot of the quirks have been sorted out.
I’m still not crazy with the double-click action on the side power button to confirm purchases in the App Store on an iPhone X/XS/XR. I’d probably dislike it even more on an iPad Pro, because you can’t do it one-handed, assuming Apple uses the same UX mechanism.
Another issue that goes beyond usability — and unlearning learned habits with the home button and Touch ID with a Face ID-based iPad Pro — is how well we can expect Face ID to work on a much larger device that is held further away from the face and in two different orientations.
Read also: Rescuing tablets from the abyss: Can education and field applications save them?
I tended to use my iPad Pro most in a landscape orientation because it was the 12.9-inch model and holding it in a portrait mode was cumbersome. On the 10-inch model, it is less cumbersome, but I still feel that most people tend to use this device in landscape due to how most apps are written to take advantage of the screen real estate.
Placing the Face ID sensor with the front-facing camera on the top of the screen in portrait mode, as it is on the iPhone X would be aesthetically weird, but it would probably still work.
However, if the iPad Pro has the same iPhone X-style « notch » in a similar position on the device, it would likely annoy a lot of users, because it would appear on the right side or the left side of the screen in landscape.
So, I am going to go against convention and say that on the next iPad Pro, the selfie camera and the Face ID sensor will be placed on the top of the screen in a landscape orientation — not a portrait one.
As to cameras, it’s very likely that at least the 12.9-inch SKU of the iPad Pro will inherit the front- and rear-camera configurations of the iPhone XR, and that includes the 12-megapixel sensor in the rear and 7-megapixel sensor in the front with optical image stabilization (OIS). I’m not expecting the same dual cameras in the rear from the XS and XS Max, but it’s possible.
It is in this area where I believe the most amount of (modest) speculation is going to occur. The fastest chip Apple has right now is the 2.49Ghz 64-bit A12 Bionic, which utilizes a big. LITTLE-style asymmetrical-multiprocessing architecture using two larger « Vortex » cores and four smaller « Tempest » cores.
The existing A10X in the second-generation iPad Pro utilizes three large « Hurricane » cores and three « Zephyr » cores.
While Apple could simply dump the existing A12 Bionic from the iPhone XS into the new iPad Pro, I think they will revision the chip to an A12X, by adding one (maybe two) additional « Vortex » and a perhaps as much six « Tempest » cores using the existing TSMC fabrication process in the iPhone XS.
So a 3-4 Vortex/Tempest configuration. Or a 3-6 or 4-6. If I had to take bets, more likely a 3-6.
I don’t expect 6-6 or 6-8 or 8-8 until the introduction of an A13 or A13X potentially in an ARM-based Mac.
The A12 in the iPhone XS uses the M12 motion chip. I expect there will be an M12 — that’s a given.
The A12 uses a 4-core custom Apple GPU, which is a departure from the 12-core PowerVR-based architecture on the A10X. I expect that the core count will probably increase, likely to six based on display requirements.
I also feel it is safe to assume that the iPad Pro will have modest RAM improvements over the previous model (and the iPhone XS) which had 3GB LPDDR4X onboard. So, 4GB is probably what we are going to end up with, with 128K instruction/Data of L1 and 8MB of L2 cache, respectively. 6GB of RAM would be nice, but I doubt it.
I believe that the 10-inch version of the iPad Pro is likely to maintain the same or similar screen technology and specifications as the previous version at 1920×1080, but the 12.9-inch is likely to undergo significant improvements.
Currently, the 12.9-inch iPad has a 2732×2048 264ppi screen, which uses Apple’s Promotion screen refresh and wide-color display tech. The resolution of the iPad Pro 12.9-inch has not changed since its launch in 2015, so it is due for a change.
I believe the 2018 iPad Pro 12.9-inch will be the first Apple mobile device to integrate a 4K (3840×2160) resolution screen so that it can consume 4K native content on the iTunes store, which, currently, only some of the highest-end Mac systems and Apple TVs connected to 4K televisions can natively display.
While many of the other improvements described in this article are highly iterative, a 4K display on an iPad Pro would be a significant enhancement and departure from what the product has now, but it would also demonstrate significant value-add and a reason for existing iPad Pro owners to upgrade to a new model.
As to communications and networking, the deed has already been done: Qualcomm modems were dumped in favor of Intel modems in current iPhone models.
Given that Apple ships much fewer iPads than iPhones, in order to simplify its supply chain, I believe we are likely (guaranteed) to see an Intel-only LTE modem in the iPad Pro just as we have now on the iPhone XS, XS Max, and XR.
Read also: Introducing the Mac mini Pro
I also expect to see the same or a similar Apple/USI 802.11ac MU-MIMO Wi-Fi/Bluetooth module that exists in the iPhone XS.
I also think that, like the iPhones that recently did away with it, we can finally say goodbye to the headphone jack in the iPad Pro. If you are still using wired headphones (like me), it’s time to break out that Lightning-to-Mini jack dongle, in case you haven’t been using it on both your iPhone and iPad already.
